Select Page

Forum

You need to log in to create posts and topics.

How to replace the Drum Unit of the Brother MFC-8820D Multifunction Printer

  1. Open the front cover of your Brother MFC-8820D Multifunction Printer.
  2. Then, you must remove the exhausted drum unit from the printer by grabbing its front side and carefully pulling it out of the printer compartment.
  3. After that, you must pull the toner cartridge towards you while pushing down the blue lock release lever, which is located on the right side of the exhausted drum unit, in order to detach the toner cartridge from the exhausted consumable component.
  4. Take the new drum unit out of the protective/transport packaging, and immediately after that, you must install the toner cartridge by pushing it down into the new drum unit until you hear a click.
  5. Install the new drum unit into the machine, and then press and hold down the [Clear/Back] button until the following message ''Replace Drum <second line> 1.Yes 2.No'' appears on the control LCD.
  6. Confirm the new drum unit installation, resp. the reset of the drum counter, by pressing [1], and then close the front cover of your Brother MFC-8820D Multifunction Printer.